AT Command Console

Baseband & UE DevicesReady to RunLocation: /usr/local/bin/at-console

Command Line Execution

Run this command in the TelcoChisel terminal to launch or execute the tool:

AT Command Console Command
at-console /dev/ttyUSB0

Detailed Technical Overview

AT Command Console is a pre-installed tool in TelcoChisel OS. Interactive AT command terminal (minicom) pre-configured for modem control. Supports querying IMEI, network registration, signal strength, and USSD. It belongs to the 'BASEBAND' category, supporting advanced security auditing and network pentesting workflows.

Configuration & Usage Guide

To initialize and configure AT Command Console for telecom security audits, follow these steps:

  1. 1Connect the target smartphone or modem via USB with DIAG or BROM mode enabled.
  2. 2Verify serial port or USB endpoints using 'lsusb' or 'dmesg | tail -n 20'.
  3. 3Execute command: at-console /dev/ttyUSB0

Troubleshooting & Security Audits

AT Command Console Audit Warning
Ensure the modem's diagnostic USB interface is exposed. Handsets often require root access or dialing secret codes (*#*#3424#*#*) to enable DIAG/test mode.
BASEBAND REVERSING

Master AT Command Console with Interactive Telecom Labs

Practice deploying AT Command Console against live cellular networks, radio interfaces, and mobile cores in TelcoSec Academy's browser-accessible cloud sandboxes.

Interactive Cloud Labs No Hardware Required CTSP Certification
Launch Interactive Labapp.telcosec.net · Instant access

Frequently Asked Questions

How do I run AT Command Console in TelcoChisel?

You can execute it directly from the terminal or using the command: at-console /dev/ttyUSB0

What is the default installation path?

The tool or environment is configured at: /usr/local/bin/at-console

Back to Tools Directory