atinout

Baseband & UE DevicesReady to RunLocation: /usr/local/bin/atinout

Command Line Execution

Run this command in the TelcoChisel terminal to launch or execute the tool:

atinout Command
echo 'AT+CGMI' | atinout - /dev/ttyUSB0 -

Detailed Technical Overview

atinout is a pre-installed tool in TelcoChisel OS. Quick command-line tool to send AT commands to a modem and capture the output. Excellent for scripting USSD or SMS tasks. It belongs to the 'BASEBAND' category, supporting advanced security auditing and network pentesting workflows.

Configuration & Usage Guide

To initialize and configure atinout for telecom security audits, follow these steps:

  1. 1Connect the target smartphone or modem via USB with DIAG or BROM mode enabled.
  2. 2Verify serial port or USB endpoints using 'lsusb' or 'dmesg | tail -n 20'.
  3. 3Execute command: echo 'AT+CGMI' | atinout - /dev/ttyUSB0 -

Troubleshooting & Security Audits

atinout Audit Warning
Ensure the modem's diagnostic USB interface is exposed. Handsets often require root access or dialing secret codes (*#*#3424#*#*) to enable DIAG/test mode.
BASEBAND REVERSING

Master atinout with Interactive Telecom Labs

Practice deploying atinout against live cellular networks, radio interfaces, and mobile cores in TelcoSec Academy's browser-accessible cloud sandboxes.

Interactive Cloud Labs No Hardware Required CTSP Certification
Launch Interactive Labapp.telcosec.net · Instant access

Frequently Asked Questions

How do I run atinout in TelcoChisel?

You can execute it directly from the terminal or using the command: echo 'AT+CGMI' | atinout - /dev/ttyUSB0 -

What is the default installation path?

The tool or environment is configured at: /usr/local/bin/atinout

Back to Tools Directory