Falcon (LTE Security Analyzer)

Mobile (4G / LTE)Ready to RunLocation: /usr/local/bin/falcon

Command Line Execution

Run this command in the TelcoChisel terminal to launch or execute the tool:

Falcon (LTE Security Analyzer) Command
falcon --help

Detailed Technical Overview

Falcon (LTE Security Analyzer) is a pre-installed tool in TelcoChisel OS. Fast cellular over-the-air protocol analysis framework for detecting LTE rogue base stations, tracking temporary mobile identifiers, and inspecting RRC connection setups. It belongs to the '4G' category, supporting advanced security auditing and network pentesting workflows.

Configuration & Usage Guide

To initialize and configure Falcon (LTE Security Analyzer) for telecom security audits, follow these steps:

  1. 1Configure EARFCN carrier frequency and RF front-end gain in the config file.
  2. 2Ensure low-latency kernel privileges: id | grep realtime
  3. 3Launch LTE tool: falcon --help

Troubleshooting & Security Audits

Falcon (LTE Security Analyzer) Audit Warning
Reduce RF bandwidth (e.g. from 20 MHz to 5 MHz) if USB 3.0 controllers drop samples. Avoid running 4G high-rate PHY layers inside virtual machines without passthrough.
LTE / 4G LAB

Master Falcon (LTE Security Analyzer) with Interactive Telecom Labs

Practice deploying Falcon (LTE Security Analyzer) against live cellular networks, radio interfaces, and mobile cores in TelcoSec Academy's browser-accessible cloud sandboxes.

Interactive Cloud Labs No Hardware Required CTSP Certification
Launch Interactive Labapp.telcosec.net · Instant access

Frequently Asked Questions

How do I run Falcon (LTE Security Analyzer) in TelcoChisel?

You can execute it directly from the terminal or using the command: falcon --help

What is the default installation path?

The tool or environment is configured at: /usr/local/bin/falcon

Back to Tools Directory