GTP5G Kernel Module

Mobile (5G / NR)Setup RequiredLocation: /opt/telcosec/gtp5g/ (helper: gtp5g-load)

Command Line Execution

Run this command in the TelcoChisel terminal to launch or execute the tool:

GTP5G Kernel Module Command
sudo gtp5g-load

Detailed Technical Overview

GTP5G Kernel Module is a pre-installed tool in TelcoChisel OS. Linux kernel module implementing the GTP-U encapsulation layer required by UERANSIM and free5GC for 5G user-plane forwarding. It belongs to the '5G' category, supporting advanced security auditing and network pentesting workflows.

Configuration & Usage Guide

To initialize and configure GTP5G Kernel Module for telecom security audits, follow these steps:

  1. 1Inspect YAML configuration for 5G PLMN (default 001/01) and AMF/gNB IP bindings.
  2. 2Verify TUN interface or GTP5G kernel module if testing user plane forwarding.
  3. 3Execute 5G test suite: sudo gtp5g-load

Troubleshooting & Security Audits

GTP5G Kernel Module Audit Warning
Ensure the 5G Core AMF SCTP port (38412) is accessible. Confirm gtp5g kernel module is loaded for UPF user-plane acceleration.
5G SA CORE SANDBOX

Master GTP5G Kernel Module with Interactive Telecom Labs

Practice deploying GTP5G Kernel Module against live cellular networks, radio interfaces, and mobile cores in TelcoSec Academy's browser-accessible cloud sandboxes.

Interactive Cloud Labs No Hardware Required CTSP Certification
Launch Interactive Labapp.telcosec.net · Instant access

Frequently Asked Questions

How do I run GTP5G Kernel Module in TelcoChisel?

You can execute it directly from the terminal or using the command: sudo gtp5g-load

What is the default installation path?

The tool or environment is configured at: /opt/telcosec/gtp5g/ (helper: gtp5g-load)

Back to Tools Directory