Linphone

VoIP & PBXReady to RunLocation: System application (linphone)

Command Line Execution

Run this command in the TelcoChisel terminal to launch or execute the tool:

Linphone Command
linphone

Detailed Technical Overview

Linphone is a pre-installed tool in TelcoChisel OS. Open-source SIP softphone used for voice and video over IP. Useful as an alternative to Zoiper for testing PBX configurations and SIP registrars. It belongs to the 'VOIP' category, supporting advanced security auditing and network pentesting workflows.

Configuration & Usage Guide

To initialize and configure Linphone for telecom security audits, follow these steps:

  1. 1Configure target SIP proxy/registrar IP address and port (default 5060/5061 UDP/TCP).
  2. 2Specify extension wordlist or target user accounts.
  3. 3Launch VoIP audit: linphone

Troubleshooting & Security Audits

Linphone Audit Warning
Verify SIP ports 5060/5061 and RTP port ranges (10000-20000 UDP) are routed. Ensure voice VLAN tag is active if sniffing VoIP subnets.
CARRIER VOIP LAB

Master Linphone with Interactive Telecom Labs

Practice deploying Linphone against live cellular networks, radio interfaces, and mobile cores in TelcoSec Academy's browser-accessible cloud sandboxes.

Interactive Cloud Labs No Hardware Required CTSP Certification
Launch Interactive Labapp.telcosec.net · Instant access

Frequently Asked Questions

How do I run Linphone in TelcoChisel?

You can execute it directly from the terminal or using the command: linphone

What is the default installation path?

The tool or environment is configured at: System application (linphone)

Back to Tools Directory