OpenBTS

Mobile (2G / GSM)Setup RequiredLocation: /opt/telcosec/openbts/ (helper: openbts-install)

Command Line Execution

Run this command in the TelcoChisel terminal to launch or execute the tool:

OpenBTS Command
sudo openbts-install

Detailed Technical Overview

OpenBTS is a pre-installed tool in TelcoChisel OS. Pioneering open-source GSM base transceiver station. Implements the Um air interface enabling rogue GSM cell and protocol audit scenarios. It belongs to the '2G' category, supporting advanced security auditing and network pentesting workflows.

Configuration & Usage Guide

To initialize and configure OpenBTS for telecom security audits, follow these steps:

  1. 1Calibrate transceiver oscillator drift using kalibrate: kal -s GSM900
  2. 2Configure ARFCN, MCC, MNC, and LAC in the transceiver config file.
  3. 3Launch utility: sudo openbts-install

Troubleshooting & Security Audits

OpenBTS Audit Warning
Verify RF clock stability (PPM error < 2). Operating without an external TCXO or GPSDO on HackRF will cause mobile handsets to reject cell selection.
GSM / 2G SECURITY

Master OpenBTS with Interactive Telecom Labs

Practice deploying OpenBTS against live cellular networks, radio interfaces, and mobile cores in TelcoSec Academy's browser-accessible cloud sandboxes.

Interactive Cloud Labs No Hardware Required CTSP Certification
Launch Interactive Labapp.telcosec.net · Instant access

Frequently Asked Questions

How do I run OpenBTS in TelcoChisel?

You can execute it directly from the terminal or using the command: sudo openbts-install

What is the default installation path?

The tool or environment is configured at: /opt/telcosec/openbts/ (helper: openbts-install)

Back to Tools Directory