Osmocom SIMtrace 2 Host
Command Line Execution
Run this command in the TelcoChisel terminal to launch or execute the tool:
Osmocom SIMtrace 2 Host Command
simtrace2-listDetailed Technical Overview
Osmocom SIMtrace 2 Host tools contain companion daemons and command utilities to operate the SIMtrace 2 USB hardware. It captures ISO-7816 APDU communications between a mobile terminal and a physical SIM card, forwarding traces to Wireshark.
Configuration & Usage Guide
To initialize and configure Osmocom SIMtrace 2 Host for telecom security audits, follow these steps:
- 1Connect the SIMtrace 2 hardware via USB.
- 2List the connected SIMtrace devices: simtrace2-list
- 3Run the sniffer daemon: simtrace2-sniff -i 127.0.0.1 -p 4729
Troubleshooting & Security Audits
Osmocom SIMtrace 2 Host Audit Warning
If the device is not found, check the green status LED on the SIMtrace board and ensure your user is in the 'plugdev' group.
SMARTCARD & ESIM LAB
Master Osmocom SIMtrace 2 Host with Interactive Telecom Labs
Practice deploying Osmocom SIMtrace 2 Host against live cellular networks, radio interfaces, and mobile cores in TelcoSec Academy's browser-accessible cloud sandboxes.
Interactive Cloud Labs No Hardware Required CTSP Certification
Frequently Asked Questions
What hardware is required?
The physical SIMtrace 2 board, FPC flat cable, and target SIM card.
What protocol is used to forward traces?
It uses GSMTAP to wrap ISO-7816 smart card frames, allowing Wireshark to dissect SIM interactions.