QCSuper

Baseband & UE DevicesReady to RunLocation: System-wide (pip: qcsuper)

Command Line Execution

Run this command in the TelcoChisel terminal to launch or execute the tool:

QCSuper Command
qcsuper --help

Detailed Technical Overview

QCSuper is a tool for capturing and parsing cellular protocol frames from Qualcomm-based smartphones. It speaks the proprietary Qualcomm DIAG protocol over USB to capture raw OTA network signaling packets (2G, 3G, 4G, 5G) into PCAP files.

Configuration & Usage Guide

To initialize and configure QCSuper for telecom security audits, follow these steps:

  1. 1Connect a Qualcomm device via USB and enable USB debugging and DIAG port mode.
  2. 2Check the DIAG serial port name (e.g. /dev/ttyUSB0).
  3. 3Capture packets to a PCAP file: qcsuper --adb --wireshark-live --info-raw-data

Troubleshooting & Security Audits

QCSuper Audit Warning
Ensure your phone is rooted and that the DIAG mode is active (usually activated via AT commands or device-specific service codes).
BASEBAND REVERSING

Master QCSuper with Interactive Telecom Labs

Practice deploying QCSuper against live cellular networks, radio interfaces, and mobile cores in TelcoSec Academy's browser-accessible cloud sandboxes.

Interactive Cloud Labs No Hardware Required CTSP Certification
Launch Interactive Labapp.telcosec.net · Instant access

Frequently Asked Questions

What protocols can QCSuper capture?

It captures GSM, UMTS, LTE, and 5G NAS protocol layers, including RRC messages.

Can I pipe QCSuper captures into Wireshark live?

Yes, the --wireshark-live parameter automatically spawns Wireshark and streams the packets in real time.

Back to Tools Directory