srsUE

Mobile (4G / LTE)Ready to RunLocation: System-wide

Command Line Execution

Run this command in the TelcoChisel terminal to launch or execute the tool:

srsUE Command
srsue /etc/srsran/ue.conf

Detailed Technical Overview

srsUE is a pre-installed tool in TelcoChisel OS. Software-defined LTE UE (User Equipment) that connects to real or simulated eNodeBs. Used for protocol testing, attach procedures, and downlink captures. It belongs to the '4G' category, supporting advanced security auditing and network pentesting workflows.

Configuration & Usage Guide

To initialize and configure srsUE for telecom security audits, follow these steps:

  1. 1Configure EARFCN carrier frequency and RF front-end gain in the config file.
  2. 2Ensure low-latency kernel privileges: id | grep realtime
  3. 3Launch LTE tool: srsue /etc/srsran/ue.conf

Troubleshooting & Security Audits

srsUE Audit Warning
Reduce RF bandwidth (e.g. from 20 MHz to 5 MHz) if USB 3.0 controllers drop samples. Avoid running 4G high-rate PHY layers inside virtual machines without passthrough.
LTE / 4G LAB

Master srsUE with Interactive Telecom Labs

Practice deploying srsUE against live cellular networks, radio interfaces, and mobile cores in TelcoSec Academy's browser-accessible cloud sandboxes.

Interactive Cloud Labs No Hardware Required CTSP Certification
Launch Interactive Labapp.telcosec.net · Instant access

Frequently Asked Questions

How do I run srsUE in TelcoChisel?

You can execute it directly from the terminal or using the command: srsue /etc/srsran/ue.conf

What is the default installation path?

The tool or environment is configured at: System-wide

Back to Tools Directory