telcosec-ran-status

Mobile (5G / NR)Ready to RunLocation: /usr/local/bin/telcosec-ran-status

Command Line Execution

Run this command in the TelcoChisel terminal to launch or execute the tool:

telcosec-ran-status Command
telcosec-ran-status

Detailed Technical Overview

telcosec-ran-status is a pre-installed tool in TelcoChisel OS. Real-time cellular radio access network emission monitor and telemetry dashboard for tracking active 4G eNodeB and 5G gNodeB transmission states. It belongs to the '5G' category, supporting advanced security auditing and network pentesting workflows.

Configuration & Usage Guide

To initialize and configure telcosec-ran-status for telecom security audits, follow these steps:

  1. 1Inspect YAML configuration for 5G PLMN (default 001/01) and AMF/gNB IP bindings.
  2. 2Verify TUN interface or GTP5G kernel module if testing user plane forwarding.
  3. 3Execute 5G test suite: telcosec-ran-status

Troubleshooting & Security Audits

telcosec-ran-status Audit Warning
Ensure the 5G Core AMF SCTP port (38412) is accessible. Confirm gtp5g kernel module is loaded for UPF user-plane acceleration.
5G SA CORE SANDBOX

Master telcosec-ran-status with Interactive Telecom Labs

Practice deploying telcosec-ran-status against live cellular networks, radio interfaces, and mobile cores in TelcoSec Academy's browser-accessible cloud sandboxes.

Interactive Cloud Labs No Hardware Required CTSP Certification
Launch Interactive Labapp.telcosec.net · Instant access

Frequently Asked Questions

How do I run telcosec-ran-status in TelcoChisel?

You can execute it directly from the terminal or using the command: telcosec-ran-status

What is the default installation path?

The tool or environment is configured at: /usr/local/bin/telcosec-ran-status

Back to Tools Directory