VLAN (vconfig)

ADSL & BroadbandReady to RunLocation: System-wide

Command Line Execution

Run this command in the TelcoChisel terminal to launch or execute the tool:

VLAN (vconfig) Command
vconfig

Detailed Technical Overview

VLAN (vconfig) is a pre-installed tool in TelcoChisel OS. VLAN hopping and manipulation tool for executing attacks against DSLAM and Open vSwitch configurations. It belongs to the 'ADSL' category, supporting advanced security auditing and network pentesting workflows.

Configuration & Usage Guide

To initialize and configure VLAN (vconfig) for telecom security audits, follow these steps:

  1. 1Connect Ethernet interface to the broadband testbed or target DSLAM/CMTS trunk.
  2. 2Configure VLAN sub-interfaces if testing 802.1Q or QinQ encapsulation.
  3. 3Execute tool: vconfig

Troubleshooting & Security Audits

VLAN (vconfig) Audit Warning
Ensure your network interface card (NIC) supports raw socket injection, promiscuous mode, and IEEE 802.1Q VLAN tagging without driver frame dropping.
HANDS-ON TELECOM LABS

Master VLAN (vconfig) with Interactive Telecom Labs

Practice deploying VLAN (vconfig) against live cellular networks, radio interfaces, and mobile cores in TelcoSec Academy's browser-accessible cloud sandboxes.

Interactive Cloud Labs No Hardware Required CTSP Certification
Launch Interactive Labapp.telcosec.net · Instant access

Frequently Asked Questions

How do I run VLAN (vconfig) in TelcoChisel?

You can execute it directly from the terminal or using the command: vconfig

What is the default installation path?

The tool or environment is configured at: System-wide

Back to Tools Directory