YateBTS

Mobile (2G / GSM)Setup RequiredLocation: /opt/telcosec/yatebts/ (helper: yatebts-install)

Command Line Execution

Run this command in the TelcoChisel terminal to launch or execute the tool:

YateBTS Command
sudo yatebts-install

Detailed Technical Overview

YateBTS is a pre-installed tool in TelcoChisel OS. Open-source GSM/UMTS BTS implementation built on the Yate telephony engine. Optimized for BladeRF A4 with a dedicated hardware config. It belongs to the '2G' category, supporting advanced security auditing and network pentesting workflows.

Configuration & Usage Guide

To initialize and configure YateBTS for telecom security audits, follow these steps:

  1. 1Calibrate transceiver oscillator drift using kalibrate: kal -s GSM900
  2. 2Configure ARFCN, MCC, MNC, and LAC in the transceiver config file.
  3. 3Launch utility: sudo yatebts-install

Troubleshooting & Security Audits

YateBTS Audit Warning
Verify RF clock stability (PPM error < 2). Operating without an external TCXO or GPSDO on HackRF will cause mobile handsets to reject cell selection.
GSM / 2G SECURITY

Master YateBTS with Interactive Telecom Labs

Practice deploying YateBTS against live cellular networks, radio interfaces, and mobile cores in TelcoSec Academy's browser-accessible cloud sandboxes.

Interactive Cloud Labs No Hardware Required CTSP Certification
Launch Interactive Labapp.telcosec.net · Instant access

Frequently Asked Questions

How do I run YateBTS in TelcoChisel?

You can execute it directly from the terminal or using the command: sudo yatebts-install

What is the default installation path?

The tool or environment is configured at: /opt/telcosec/yatebts/ (helper: yatebts-install)

Back to Tools Directory